Utilize a Pneumatic Forklift
You could normally find pneumatic forklifts in warehouses and shipping operations. Also called pump trucks or pallet trucks, they are used to transport things and supplies around on wooden pallets using metal forks that are mounted on a wheeled counterweight. The counterweight contains a pump that raises the forks off the ground. A pallet truck is designed to be operated by a single person.
Pallet trucks must be operated with care to avoid loss of control while raising heavy loads. Machine must be inspected before operating. Clear the wheels area of any obstructions. Make certain that the handle smoothly turns. The pallet should be carefully stacked to be able to ensure that nothing will fall off during transportation.
On the end of the pallet truck's handle, squeeze the level found on the inside of the metal loop to be able to lower the forks and release the air in the pump. The forks could then be pushed into the slots of the pallet. The forks should be in the middle to guarantee even distribution of the pallet's weight across them. Lift the forks from the ground by pumping the handle of the pneumatic lift until the pallet has cleared the ground completely. Do not lift the pallet too high or the forklift could unbalance.
Move the pallet by pulling on the handle and then dragging it behind you. It is really dangerous to push the pallet ahead of you because the thrust can cause it to go out of control. Slowly take turns and don't attempt to stop abruptly. Stop gradually, squeeze the lever, and the forks would lower to the ground. Finally, remove the forks from the pallet by pulling them out. Return the pallet truck to its permanent place.